|
#1
|
||||
|
||||
windows problem on the new site.
it seems there is a few places in the new layout where windows aren't wide enough for the data on the screen, like the forum for instance...the right side is cutting off stuff.
i also noticed the problem on the top header of the site home page where the song data that's playing and been played is. a couple of times the data went below the window...i noted that the lock wasn't on the window and i could manually slide the hidden data into view, but then that cut the top off, which i could slide back the other way.... is that a known problem...or is it just me being a day late and a dollar short? |
#2
|
||||
|
||||
Re: windows problem on the new site.
buy a Mac!
__________________
VAXman -- Watcher of the moon, watcher of all. ----------------Mopper of the moon, mopper of all. -------------------- Aural Moon's Janitorial Services ---------------------and Restroom Supplies, and Techno-patsy -- ![]() |
#3
|
||||
|
||||
Re: windows problem on the new site.
Heh - a Mac won't help you either for this problem.
It sounds like the problem is that you are running your computer at a relatively low resolution. You're able to scroll over and see the "missing" stuff on the right? The site is optimized for 1024x768 in the "wide" position. The site also has a "thin" button that makes it visible for 800x600 - to switch between these two resolution settings on the site, find the two buttons just below the "Contact" tab at the top of the screen. BUt I would highly recommend that you use the wide version of the site, and make sure your screen resolution is at least 1024x768 Let me know if this helps. |
#4
|
||||
|
||||
Re: windows problem on the new site.
Quote:
Quote:
either way, that wasn't going to fix the header problem at the top of the site where the song play data is. the problem i saw was when someone had a very large dedication paragraph. it caused the bottom of the song data under it to go in behind the FRAME below it. and... i could scroll that into view. i hung my cursor over the line where the frames would have intersected and the cursor went to the capital I, which indicated i could move the data frame...and it did. try a real long test dedication paragraph and see if you can replicate what i saw... Last edited by ricb : 08-12-2006 at 09:26 PM. |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
All times are GMT -5. The time now is 10:02 AM. |